Payment & Shipping Terms:
|Product Name:||Z-paster180-30-10F||Thermal Conductivity:||3 W/mK|
|Dielectric Constant:||5.5 MHz||Hardness:||65 Shore00|
silicone gap filler,
thermally conductive gap filler
No-silicone required case applied good performance 3w 2mmT thermal conductive silicone free gap filler pad 2.88g/cc
Ziitek company is a manufacturer of thermal conductive gap fillers, low melting point thermal interface materials, thermal conductive insulators, thermally conductive tapes, electrically & thermally conductive Interface pads and thermal grease,Thermal Conductive plastic,Silicone Rubber,Silicone Foams,Phase Changing Materials products, with well-equipped testing equipment and strong technical force.
Z-paster180-30-10F is a high performance and compatible non-silicone material of the thermal conductive interface materials.The role is to fill the air gaps between the heating elements and the heat dissipation fins or the metal base.
It applies to the liner based on silicone suitably. The flexibility and elasticity make it suited to the coating of the very uneven surfaces.Heat can transmit to the metal housing or dissipation plate from the separate elements or even the entire PCB, which in effect enhances the efficiency and life-time of the heat-generating electronic components.
|Available in varies thicknesses|
|Broad range of hardnesses available|
|Moldability for complex parts|
|Outstanding thermal performance|
|High tack surface reduces contact resistance|
>Cooling components to the chassis of frame
>Car Battery & Power Supply
>Graphics Card Thermal Module
>Set Top Box
> Medical devices
>Mass storage devices
>SFP optical module
>Miniature heat tube radiator
|Typical Properties of Z-Paster180-30-10F Series|
|Color||Gray||Visual||Dielectric Breakdown Voltage (T= 1mm above)||>5000 VAC||ASTM D149|
|Construction||Silicone-free The metal oxide fills||**********||Dielectric Constant||5.5 MHz||ASTM D150|
|Thermal Conductivity||3.0 W/mK||ASTM D5470||Volume Resistivity||6.0X1013 Ohm-meter||ASTM D257|
|Hardness||65 Shore 00||ASTM 2240||Continuous Use Temp||– 20 To 125 ℃||**********|
|Specific Gravity||2.88 g/cc||ASTM D297||Outgassing (TML)||0.30%||ASTM E595|
|Thickness||2mmT||ASTM D374||Flame Rating||94 V-0||
0.010-inch to 0.200-inch (0.25mm to 5.0mm)
Proprietary NS1 option available to eliminate tack from one side to aid in handling.
Contact Person: Miss. Dana